Cecilia Persson
Professor , docent vid Institutionen för materialvetenskap; Medicinsk teknik
- Telefon:
- 018-471 79 11
- Mobiltelefon:
- 070-248 96 24
- E-post:
- cecilia.persson@angstrom.uu.se
- Besöksadress:
- Ångströmlaboratoriet, Lägerhyddsvägen 1
- Postadress:
- Box 35
751 03 UPPSALA
- Akademiska meriter:
- Docent i teknisk fysik
Mer information visas för dig som medarbetare om du loggar in.
Kort presentation
Jag presenterar min forskning kort här: https://media.medfarm.uu.se/play/kanal/515/video/9738
My research focuses on biomaterials, biomechanics and the interaction in between. Current activities largely revolve around additive manufacturing, or 3D-printing, of new biomaterials and implants.
Read more on https://materialvetenskap.uu.se/biomedical-engineering/research/BioMaterial-Systems/
Nyckelord
- additive manufacturing
- biomaterials
- biomechanics
- biomedical engineering
- materials science
Biografi
ACADEMIC QUALIFICATIONS:
2018, Professor in Applied Materials Science with Specialization in Biomaterials. Uppsala University.
2015, Docent (Assoc. Prof.) in Engineering Science with Specialization in Materials Science. Uppsala University.
2009, PhD in Mechanical Engineering. University of Leeds. Thesis title: Biomechanical modelling of spinal cord and bone fragment interactions during a vertebral burst fracture.
2004, MSc in Materials Engineering. European degree (EEIGM) with triple diploma from Luleå University of Technology, Lorraine University of Technology (EEIGM), Technical University of Catalonia. Master thesis at Istituto Ortopedico Rizzoli, on bone cements.
ACADEMIC POSITIONS:
2020-2023. Section Dean Engineering, Uppsala University.
2018-ongoing. Professor, Uppsala University.
2015 - 2018. Senior lecturer / Assoc. Prof., Uppsala University.
2011 - 2015. Lecturer / Ass. Prof., Uppsala University.
2009 - 2011. Researcher, Uppsala University.
2006 - 2009. PhD student, University of Leeds.
2005 - 2006. Researcher, Istituto Ortopedico Rizzoli.
Forskning
Denna text finns inte på svenska, därför visas den engelska versionen.
My research focuses on biomaterials, biomechanics and the interaction in between. I have a strong focus on additive manufacturing, or 3D-printing.
Projects revolve around the development and characterization of new biomaterials but also characterization of soft and hard tissues. Other projects focus on the design and characterization of implants, alone or in combination with tissues.
Ongoing projects:
- Development of biomaterials for and through additive manufacturing
- Implant design for and through additive manufacturing
- Improved models for biomaterial and implant evaluation
Publikationer
Senaste publikationer
- Structural Si3N4-SiO2 glass ceramics with bioactive and anti-bacterial properties (2024)
- Hydroxyapatite particle shape affects screw attachment in cancellous bone when augmented with hydroxyapatite-containing hydrogels (2024)
- The porous cantilever beam as a model for spinal implants (2023)
- Towards a bioprinted spinal cord model for monitoring cell responses to particles and ions released from spinal implants (2023)
- In vitro 3D model for monitoring glial cell responses to particles and ions released from spinal implants (2023)
Alla publikationer
Artiklar
- Structural Si3N4-SiO2 glass ceramics with bioactive and anti-bacterial properties (2024)
- Hydroxyapatite particle shape affects screw attachment in cancellous bone when augmented with hydroxyapatite-containing hydrogels (2024)
- The porous cantilever beam as a model for spinal implants (2023)
- Fe and C additions decrease the dissolution rate of silicon nitride coatings and are compatible with microglial viability in 3D collagen hydrogels (2023)
- Nanostructured Ag-Bioglass Implant Coatings with Antibacterial and Osteogenic Activity (2023)
- Quasi-static and dynamic mechanical properties of a low-modulus bone cement for spinal applications (2023)
- Microstructural features in thin walls of Mg alloy WE43 processed by powder bed fusion - laser beam (PBF-LB) (2023)
- Higher Laser power improves strength but reduces corrosion resistance of Mg WE43 processed by powder bed fusion (2023)
- Fully 3D-printed PVDF-TrFE based piezoelectric devices with PVDF-TrFE-rGO composites as electrodes (2023)
- Effects of N/Si ratio on mechanical properties of amorphous silicon nitride coating (2023)
- An improved trabecular bone model based on Voronoi tessellation (2023)
- A new bone adhesive candidate- does it work in human bone? (2022)
- Application of phase-field fracture theories and digital volume correlation to synchrotron X-ray monitored fractures in human trabecular bone (2022)
- An ex-vivo model for the biomechanical assessment of cement discoplasty (2022)
- Composite poly(L-lactic acid) - ceramic structures for fully degradable cranial implants (2022)
- Bioactive Silicon Nitride Implant Surfaces with Maintained Antibacterial Properties (2022)
- Biocompatibility of a Zr-Based Metallic Glass Enabled by Additive Manufacturing (2022)
- Low-Modulus PMMA Has the Potential to Reduce Stresses on Endplates after Cement Discoplasty (2022)
- Microstructural Origins of the Corrosion Resistance of a Mg-Y-Nd-Zr Alloy Processed by Powder Bed Fusion - Laser Beam (2022)
- An Enhanced Understanding of the Powder Bed Fusion-Laser Beam Processing of Mg-Y-3.9wt%-Nd-3wt%-Zr-0.5wt% (WE43) Alloy through Thermodynamic Modeling and Experimental Characterization (2022)
- Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium (2022)
- Current status and future potential of wear-resistant coatings and articulating surfaces for hip and knee implants (2022)
- Functionalized silk promotes cell migration into calcium phosphate cements by providing macropores and cell adhesion motifs (2022)
- A combined experimental and numerical method to estimate the elastic modulus of single trabeculae (2022)
- The Effect of PCL Addition on 3D-Printable PLA/HA Composite Filaments for the Treatment of Bone Defects (2022)
- Hexagonal pore geometry and the presence of hydroxyapatite enhance deposition of mineralized bone matrix on additively manufactured polylactic acid scaffolds (2021)
- Silk fibroin hydrogels induced and reinforced by acidic calcium phosphate (2021)
- The Potential of Stereolithography for 3D Printing of Synthetic Trabecular Bone Structures (2021)
- Additively manufactured mesh-type titanium structures for cranial implants (2021)
- Monetite-based composite cranial implants demonstrate long-term clinical volumetric balance by concomitant bone formation and degradation (2021)
- Functional properties of low-modulus PMMA bone cements containing linoleic acid (2021)
- Long-term mechanical properties of a novel low-modulus bone cement for the treatment of osteoporotic vertebral compression fractures (2021)
- Density and mechanical properties of vertebral trabecular bone-A review (2021)
- Synthesis and assessment of metallic ion migration through a novel calcium carbonate coating for biomedical implants (2020)
- Porous polylactic acid scaffolds for bone regeneration (2020)
- The effect of N, C, Cr, and Nb content on silicon nitride coatings for joint applications (2020)
- Implicit and explicit finite element models predict the mechanical response of calcium phosphate-titanium cranial implants (2020)
- Mechanical behaviour of composite calcium phosphate-titanium cranial implants (2020)
- Si-Fe-C-N Coatings for Biomedical Applications (2020)
- The effect of two types of resorbable augmentation materials - a cement and an adhesive - on the screw pullout pullout resistance in human trabecular bone (2020)
- 3D-printed PLA/HA composite structures as synthetic trabecular bone (2020)
- Multifunctional Polymer-Free Mineral Plastic Adhesives Formed by Multiple Noncovalent Bonds (2020)
- Synthesis and assessment of metallic ion migration through a novel calcium carbonate coating for biomedical implants (2019)
- Impact of Biomimicry in the Design of Osteoinductive Bone Substitutes (2019)
- Effect of calcium phosphate heparinization on the in vitro inflammatory response and osteoclastogenesis of human blood precursor cells (2019)
- The Effect of Coating Density on Functional Properties of SiNx Coated Implants (2019)
- Towards Functional Silicon Nitride Coatings for Joint Replacements (2019)
- The Addition of Poly(Vinyl Alcohol) Fibers to Apatitic Calcium Phosphate Cement Can Improve Its Toughness (2019)
- Zebrafish embryo as a replacement model for initial biocompatibility studies of biomaterials and drug delivery systems (2019)
- The Effect of Al Addition on the Tribological Behavior of Ti-Si-Zr Alloys (2019)
- A global digital volume correlation algorithm based on higher-order finite elements (2019)
- Fatigue performance of a high-strength, degradable calcium phosphate bone cement (2018)
- Osteogenesis by foamed and 3D-printed nanostructured calcium phosphate scaffolds: Effect of pore architecture (2018)
- Heparinization of Beta Tricalcium Phosphate: Osteo-immunomodulatory Effects (2018)
- A ready-to-use acidic, brushite-forming calcium phosphate cement (2018)
- Stiffness and strength of cranioplastic implant systems in comparison to cranial bone (2018)
- Influence of cement compressive strength and porosity on augmentation performance in a model of orthopedic screw pull-out (2018)
- In vivo response to a low-modulus PMMA bone cement in an ovine model (2018)
- Compressive fatigue properties of commercially available standard and low-modulus acrylic bone cements intended for vertebroplasty (2018)
- Young’s modulus of trabecular bone at the tissue level (2018)
- Elastic properties and strain-to-crack-initation of calcium phosphate bone cements (2017)
- Compressive fatigue properties of an acidic calcium phosphate cement—effect of phase composition (2017)
- Osteoinduction by Foamed and 3D-Printed Calcium Phosphate Scaffolds (2017)
- A novel strategy to enhance interfacial adhesion in fiber-reinforced calcium phosphate cement (2017)
- Trabecular deformations during screw pull-out (2017)
- Characterization of interfacial stress transfer ability in acetylation-treated wood fibre composites using X-ray microtomography (2017)
- Evaluation of bone formation in calcium phosphate scaffolds with μCT-method validation using SEM (2017)
- In-situ Synchrotron X-ray Diffraction Analysis of the Setting Process of Brushite Cement: Reaction and Crystal Growth (2017)
- Long-term sensory disturbances after orbitozygomatic fractures (2017)
- Micrometre-sized magnesium whitlockite crystals in micropetrosis of bisphosphonate-exposed human alveolar bone (2017)
- Influence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements (2017)
- Strain-induced stiffening of nanocellulose-reinforced poly(vinyl alcohol) hydrogels mimicking collagenous soft tissues (2017)
- Comparison of a quasi-dynamic and a static extraction method for the cytotoxic evaluation of acrylic bone cements (2016)
- Ceramic cement as a potential stand-alone treatment for bone fractures: an in vitro study of ceramic-bone composites (2016)
- Compressive, diametral tensile and biaxial flexural strength of cutting-edge calcium phosphate cements (2016)
- Changes in the drug release pattern of fresh and set simvastatin-loaded brushite cement (2016)
- The effect of oligo(trimethylene carbonate) addition on the stiffness of acrylic bone cement (2016)
- Dissolution behaviour of silicon nitride coatings for joint replacements (2016)
- Morphology and dissolution rate of wear debris from silicon nitride coatings (2016)
- Hyperelastic Nanocellulose-Reinforced Hydrogel of High Water Content for Ophthalmic Applications (2016)
- Brushite foamsthe effect of Tween (R) 80 and Pluronic (R) F-127 on foam porosity and mechanical properties (2016)
- Surface and Subsurface Analyses of Metal-on-Polyethylene Total Hip Replacement Retrievals (2016)
- Evaluation of a porosity measurement method for wet calcium phosphate cements (2015)
- Long-term in vitro degradation of a high-strength brushite cement in water, PBS, and serum solution (2015)
- In vitro and in vivo response to low-modulus PMMA-based bone cement (2015)
- An evaluation of methods to determine the porosity of calcium phosphate cements (2015)
- Influence of alkali metal additives on phase transition of translucent ZrO2/SiO2 glass ceramics prepared by a sol-gel method (2015)
- Can Cobalt(II) and Chromium(III) Ions Released from Joint Prostheses Influence the Friction Coefficient? (2015)
- Biomechanics of low-modulus and standard acrylic bone cements in simulated vertebroplasty (2015)
- Impoverishment of media by bioactive hydroxyapatite hinders cell proliferation (2015)
- Inflammatory response to nano- and microstructured hydroxyapatite (2015)
- Scavenging effect of Trolox released from brushite cements (2015)
- Persistent diplopia after fractures involving the orbit related to nerve injury (2015)
- Fretting of CoCrMo and Ti6Al4V alloys in modular prostheses (2015)
- The effect of unsaturated fatty acid and triglyceride oil addition on the mechanical and antibacterial properties of acrylic bone cements (2015)
- Enhanced drug delivery of antibiotic-loaded acrylic bone cements using calcium phosphate spheres (2015)
- Porosity prediction of calcium phosphate cements based on chemical composition (2015)
- Compressive fatigue properties of a commercially available acrylic bone cement for vertebroplasty (2014)
- Assessing cement injection behaviour in cancellous bone (2014)
- The effect of composition on mechanical properties of brushite cements (2014)
- Novel injectable biomaterials for bone augmentation based on isosorbide dimethacrylic monomers (2014)
- Compressive mechanical properties and cytocompatibility of bone-compliant, linoleic acid-modified bone cement in a bovine model (2014)
- Calcium phosphate cements with strontium halides as radiopacifiers (2014)
- Robocasting of biomimetic hydroxyapatite scaffolds using self-setting inks (2014)
- Wear and friction properties of experimental Ti-Si-Zr alloys for biomedical applications (2014)
- Influence of polymer addition on the mechanical properties of a premixed calcium phosphate cement (2013)
- Mechanical and in vitro evaluation of low-modulus bone cement - Osteopal®V modified with linoleic acid (2013)
- Comparative characterization of oligomeric precursors intended for injectable implants (2013)
- Immune responses to topographically different calcium phosphate cements (2013)
- Strategies towards injectable, load-bearing materials for the intervertebral disc (2013)
- Structure and composition of silicon nitride and silicon carbon nitridecoatings for joint replacements (2013)
- Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements (2013)
- Variation in Calvarial Bone Healing Capacity (2013)
- Stability and prospect of UV/H2O2 activated titania films for biomedical use (2013)
- Numerical description and experimental validation of a rheology model for non-Newtonian fluid flow in cancellous bone (2013)
- Polyhedral oligomeric silsesquioxane (POSS)–poly(ethylene glycol) (PEG) hybrids as injectable biomaterials (2012)
- A self-hardening biodegradable cement as a drug delivery vehicle (2012)
- Evaluation of silicon nitride as a wear resistant and resorbable alternative for total joint replacement (2012)
- Fabrication and evaluation of SixNy coatings for total joint replacements (2012)
- Nano grain sized zirconia–silica glass ceramics for dental applications (2012)
- Photocatalytic activity of low temperature oxidized Ti-6Al-4V (2012)
- Low-modulus PMMA bone cement modified with castor oil (2011)
- Direct and interactive effects of three variables on properties of PMMA bone cement for vertebral body augmentation (2011)
- Premixed calcium silicate cement for endodontic applications (2011)
- Premixed calcium silicate cement for endodontic applications (2011)
- Photocatalytic Activity of Low Temperature Oxidized Ti-6Al-4V (2011)
- Synthesis and characterization of injectable composites of poly[D,L-lactide-co-(ε-caprolactone)] reinforced with β-TCP and CaCO3 for intervertebral disk augmentation (2010)
- Changes of Surface Composition and Morphology after Incorporation of Ions into Biomimetic Apatite Coating (2010)
- Compressive fatigue properties of a high-strength, degradable calcium phosphate bone cement – influence of porosity and environment
- Wear performance of a new biocompatible silicon nitride for biomedical applications
- A Topology Optimized Spinal Fusion Cage for the Use of Weak but Osteoinductive Bioceramics as Synthetic Bone Grafts
- Mechanical Characterization and Cytocompatibility of Linoleic Acid Modified Bone Cement for Percutaneous Cement Discoplasty
- Contact inactivation of human adenovirus type 5 by silicon nitride ceramics
- The addition of silicon nitride to PMMA bone cements reduces bacterial attachment while supporting pre-osteoblast viability
- Antiviral Properties of Oxidized Silicon Nitride Against SARS-CoV-2
- A ready-to-use acidic calcium phosphate cement
- The addition of poly(vinyl alcohol) fibres to apatitic calcium phosphate cement can improve its toughness
- Exploring the use of selective laser melting to control the surface roughness of a Zr-based bulk metallic glass: surface characterization, ion release and osteoblastic cell response
- The importance of hatch distance in PBF-LB processing of WE43 for balancing corrosion, cytotoxicity, and mechanical properties
- Fretting behaviour of silicon nitride against biomedical alloys for joint replacements
- Dissolution behavior of SiFeCN combinatorial coatings for biomedical applications
- Tailoring the dissolution rate and in vitro cell response of silicon nitride coatings through combinatorial sputtering with chromium and niobium
- Adhesives from Inorganic Nanoparticles and Low-Molecular-Weight Organic Compounds
Kapitel
Konferenser
- Towards a bioprinted spinal cord model for monitoring cell responses to particles and ions released from spinal implants (2023)
- In vitro 3D model for monitoring glial cell responses to particles and ions released from spinal implants (2023)
- Reducing the dissolution rate of silicon nitride coatings for spinal implants using Fe and C as alloying elements (2023)
- Degradation of poly(L-lactic acid)-calcium phosphate cement structures for degradable cranial implants (2023)
- Antibiofilm Properties of Linoleic Acid-loaded Bone Cement with and without Gentamicin (2023)
- Using neutron diffraction to reveal the effect of build direction and laser scan strategy on texture formation in an additively manufactured magnesium alloy (2023)
- Dissolution Behaviour and Biocompatibility of Combinatorially Sputtered SiFeCN Coatings for Spinal Implants (2022)
- Decreasing the dissolution rate of silicon nitride coatings for spinal implants by the addition of Fe and C (2022)
- Can 3D-printed poly(L-lactic acid) be used as support structure for fullyresorbable ceramic cranial implants ? (2022)
- Poly(L-lactic acid) and Ceramic Composite Structures for Fully Resorbable Cranial Implants (2022)
- Powder bed fusion of a biodegradable magnesium alloy (2022)
- Additive manufacturing of biodegradable magnesium alloys (2022)
- On the Residual Stress in Biodegradable Magnesium Alloys Produced by Powder Bed Fusion Laser Beam (2022)
- Residual Stresses in an Additively Manufactured Biodegradable Magnesium Alloy (2022)
- Neutron and Synchrotron measurements of Residual Stress in a Magnesium alloy produced by Powder Bed Fusion – Laser Beam (2022)
- The impact of Residual Stresses formed during PBF-LB on the Biodegradability of Magnesium alloys (2022)
- Metal Release of CoCrMo Alloy in Protein-Rich Solutions–Effect of Sliding and Manufacturing Process (2022)
- Dissolution and biocompatibility of combinatorially sputtered SiCrNbN coatings (2021)
- A model for the biomechanical assessment of discoplasty in a laboratory setting (2021)
- An ex-vivo Biomechanical Assessment of Cement Discoplasty (2021)
- Mechanical and Structural Evaluation of Synthetic Trabecular Bone Models Printed with Stereolithography (2021)
- Stereolithography shows potential in additive manufacturing ofsynthetic trabecular bone structures (2021)
- Osteoblastic cell response to an additively manufactured zirconium-based bulk metallic glass (2021)
- Biocompatibility of an additively manufactured zirconium-based bulk metallic glass (2021)
- Influence of Hot Isostatic Pressing on the corrosion resistance of Mg-4wt%Y-3wt%Nd processed by Laser - Powder Bed Fusion (2021)
- Numerical discretization of trabecular bone based on Voronoi tessellation (2021)
- Computational and experimental microstructural characterization of a magnesium WE43 Alloy processed on a commercially available PBF-LB machine (2020)
- Recombinant silk with calcium phosphates as macroporous bone scaffolds (2019)
- Effect of Deposition Parameters on the Tribocorrosive Performance of Silicon Nitride Based Coatings (2019)
- Tribocorrosive performance of silicon nitride based coatings in a hard-on-soft contact (2019)
- Wear resistance of silicon nitride coatings in a hard-on-soft contact (2018)
- Wear resistance and ion release of SiNx coatings on CoCrMo full head implants (2018)
- Evaluation of bioactive cranial implants: preliminary results from volumetric quantifications using computed tomography (CT) (2018)
- Longitudinal assessment of trends in calcium phosphate degradation for cranial implants: preliminary results from two patients (2018)
- Spallation failure of silicon nitride coatings upon dissolution in fetal bovine serum (2018)
- Morphology and adhesion of silicon nitride coatings upon soaking in fetal bovine serum (2018)
- Compositional Dependence Of Hardness And Modulus Of Sinfec Coatings (2018)
- Combinatorial coating development of Si-N-Fe-C coatings for joint implants (2018)
- Biocompatibility of co-sputtered Si-Fe-C-N coatings (2018)
- Digital Volume Correlation using Quartic FEM Interpolation and Global Optimization (2018)
- Fatigue life of a brushite cement under cyclic compressive loading (2017)
- Nanostructured Calcium Phosphate Scaffolds Trigger Osteoinduction and Osteogenesis (2017)
- Heparinisation as a tool to modulate osteoclastogenesis on calcium phosphates (2017)
- Assessment of bone formation in CaP scaffolds – µCT method development (2017)
- In-situ analysis of the fast setting reaction of brushite cement (2017)
- Modified PMMA for osteoporotic vertebral fracture - reason for a better suited PMMA cement for fragile bone. (2017)
- Elastic Modulus Of Human Single Trabeculae Estimated by Synchrotron CT Experiments And Numerical Models (2017)
- Predicting the mechanical properties of vertebral trabecular bone - a review (2017)
- A review of the relationships between density and mechanical properties of vertebral trabecular bone (2017)
- Compressive strength increase of calcium phosphate bone cements is accompanied by a stiffness increase (2016)
- The influence of porosity on the fatigue properties of brushite cement (2016)
- Long-term degradation of brushite cements in three different liquids (2016)
- Wear resistance of silicon nitride coatings in a hard-on-hard contact (2016)
- Deformation field estimation in compressed human trabecular bone using synchrotron X-ray tomography (2016)
- Deformations in trabecular bone during pull-out of screw implants (2016)
- A combined computational and experimental X-ray CT multiscale study of stable, slowly growing cracks in wood-fibre based composite materials (2016)
- The effect of two fatty acids on the antibacterial properties of calcium phosphate cements (2016)
- Combinatorial sputtering of Si-Fe-C-N coatings for joint implants (2016)
- Local stiffness measurements in apatite and brushite cements (2015)
- Influences of alkali metals additives on phase transition of translucent ZrO2/SiO2 glass ceramic prepared by sol-gel method (2015)
- Mechanical testing in uCT and synchrotron scanners for an increased understanding of the role of bone microstructure on fracture processes and in fracture treatments (2015)
- The use of bone cement to minimize interbody device subsidence (2015)
- In vivo response to low-modulus PMMA bone cements in a rodent model (2015)
- Composites of Polyvinyl Alcohol and Nanocellulose for Contact Lens Applications (2015)
- A non-drying porosity evaluation method for calcium phosphate cements (2014)
- Compressive Fatigue Properties of Acidic Calcium Phosphate Cement (2014)
- Effect of Setting Time on Drug Release from a Brushite Cement (2014)
- Calcium phosphate spheres incorporated into PMMA cement for enhanced antibacterial properties (2014)
- Compressive fatigue properties of acrylic bone cement for vertebroplasty (2013)
- Optimization of an acidic calcium phosphate cement with enhanced radiopacity (2013)
- Inflammatory response to calcium phosphate cements with patterned surfaces (2013)
- Wear zones on retrieved metal femoral heads from metal-on-polymer hip prostheses (2013)
- Prediction of porosity in hydroxyapatite and brushite cements (2013)
- Porosity prediction of calcium phosphate cements (2013)
- Mechanical and in vitro evaluation of low-modulus bone cement - Osteopal®V modified with linoleic acid (2012)
- Bioactive hybrids based on polyhedral oligomeric silsesquioxane intended as bone fillers (2012)
- Acrylic bone cement modified with oligo (trimethylene carbonate) (2012)
- Strontium halides as degradable radiopacifiers (2012)
- Treatment of low back pain using injectable, load-bearing materials – a review and outlook for future strategies (2012)
- Mechanical properties of SixNy- and SixCyNz-coatings for total joint replacements (2012)
- Micro scratch testing of silicon nitride and silicon carbon nitride coatings (2012)
- Low temperature oxidation and photocatalytic activity of Ti-6Al-4V (2012)
- Calcium phosphate sphere/PMMA composite: preparation, ion and drug release (2012)
- Translucent zirconia-silica glass ceramics for dental crowns (2012)
- Nano grain sized silica-zirconia glass ceramics for dental applications (2012)
- Effects of a natural oil on the mechanical properties and cytotoxicity of PMMA bone cement (2011)
- Premixed calcium silicate cements for endodontic applications. (2011)
- The effect of castor oil on spinal bone cement properties (2011)
- The effect of castor oil on spinal bone cement properties (2011)
- Towards Low-Modulus Bone Cements – The Effect of a Natural Oil in PMMA (2011)
- Towards Low-Modulus Bone Cements - the effect of a natural oil in PMMA (2011)
- Ball-on-disc testing of SiNx coatings for hip joint implants (2011)
- Injectable biodegradable composites for the degenerated intervertebral disc (2010)
- Analysis of the wear and tribofilm formation on silicon nitride for total hip joint replacement (2010)
- The use of calcium carbonate cements as a drug carrier (2010)
- Pre-mixed calcium silicate cement for endodontic applications (2010)
- Pre-mixed calcium silicate cement for endodontic applications (2010)
- Customised bone cement for vertebroplasty (2010)
- Customised Bone Cement for Vertebroplasty (2010)
- Evaluation of a radio-opaque premixed calcium phosphate cement (2010)
- Setting time and initial compressive strength of a radiopaque premixed calcium phosphate cement (2010)
Dataset
